Remington small pistol primers

Being a leader in both the firearms and ammunition industry remington small pistol primers knows how important it is to have the highest quality ammunition available to make your firearm perform to its fullest potential. This starts with using the best components possible to manufacture ammunition. These are the same primers Remington uses in the production of their own ammunition and performs to their highest standards. If you want the best possible out of your firearm you have to start with the best that’s why reloaders choose Remington components for their loads. Remington small pistol primers

Within every Remington primer is a group of subcomponents assembled to exceptionally tight tolerances. Primer cup dimensions are controlled to .0001″, and the priming mix is specially formulated for consistent ignition with a wide variety of powder types. Primers are tested for reliability from -20 degrees F to +150 degrees F. The unique tripod anvil design creates a larger strike area with maximum sensitivity, even with off center firing pin strikes.

Remington Small Pistol Primers #1-1/2 Product Overview

Within every centerfire primer is a group of subcomponents assembled to exceptionally precise tolerances. Primer cup dimensions are controlled to four decimal places.

The priming mix is specially formulated for consistent ignition with a wide variety of powder types, and tested for reliability over a temperature range of -20°F to +150°F.

Individual primer pellet weight is controlled to .01 grams. A unique tripod anvil design creates a larger “sweet spot” with maximum sensitivity – even with off-center firing pin strikes. And lastly, each lot is 100% visually inspected and subjected to critical ballistic tests

Special Note:

• These primers are NOT recommended for loading high pressure loads such as 357 Mag, 357 Sig or 40 S&W. Please consult a Reputable Loading Manual for loading data.